Detailed Product DescriptionPU8610 is one component polyurethane adhesive with high tensile strength and elasticity.Features1. Bond very well with surface of variety material such as all kinds of...
If you are planning to wholesale best cheap and high quality polyurethane windshield adhesive China, or hot sale polyurethane windshield adhesive in China from professional car window adhesive, pu adhesive for car manufacture, polyurethane car glass adhesive, high strength pu auto glass adhesive, high bonding windshield adhesive manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.
Special Auto glass polyurethane adhesive PU8610
◆Detailed Product Description
PU8610 is one component polyurethane adhesive with high tensile strength and elasticity.
1. Bond very well with surface of variety material such as all kinds of metal, lumber, glass, polyurethane, epoxy, resin, PU and coating material, etc. Also with good cohesive force and durable elastic sealing performance
2. One component adhesive with fabulous thixotropy, it’s convenient to apply with rapid curing
3. Excellent water, weather and aging resistance
4. Excellent wear-resisting property, high tear strength
5. Paintable and polishable
6. No sag or flow phenomena within 30mm perpends
7. Primer required
1. Specially used for windshield and side glass
2. Also use for glass steel and plastic accessories (car roof, side body and car front)
3. For bonding different material which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force
Main Raw Material
touch dry time
①All data above ware tested under standardized condition.
②All data listed in the chart were for rhe generalized item in the series; please refer to the related datasheet for special items.
③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.
Clean before operation
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
Direction of operation
Tool:Manual or pneumatic plunger caulking gun
1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength
1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength
Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately
◆Package and Storage
310ml cartridge, 20pcs/carton Keep in cool and ventilative place
400ml/600ml sausage, 20pcs/carton Temperature≤25℃, humidity≤50%RH
Color:Black Shelf life: 9 months
◆Safety Operation Material
MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from SEPNA or other distributors, or mail to service center email@example.com, or call +86-400-882-1323.
All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. SEPNA don't make assurance of any other applications outside the specification until SEPNA supply a special written guarantee. SEPNA is only responsible to replace or refund if this product is defective within the warranty period stated above. SEPNA makes it clear that will not be liable of any accidents.