Shanghai Sepna Chemical Technology Co.,Ltd
Call us on:+86-021-66310806   E-mail:
Surface Mount Epoxy Adhesive

Surface Mount Epoxy Adhesive

SE3306One component epoxy adhesive SE3306 is a kind of heat cured adhesive. It designed for the drops of high speed machine. High bonding strength ,high heat resistance, excellent electrical performan

If you are planning to wholesale best cheap and high quality surface mount epoxy adhesive China, or hot sale surface mount epoxy adhesive in China from professional surface mount epoxy adhesive manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.


One component epoxy adhesive SE3306 is a kind of heat cured adhesive. It designed for the drops of high speed machine. High bonding strength ,high heat resistance, excellent electrical performance and good storage stability.

◆Detailed Product Description


Mainly used for the bonding of the mounted components on SMT.

Properties Uncured

                        Typical Value        Range           Test Standard

Appearance              Red cream

Chemical Type           Epoxy Resin

Viscosity (Pa.s) (Brookfield RV)

Spindle 7                                    250-380         GB/T 2794-1995

Thixotropic index            8

Density (g/cm3)            1.20             1.18-1.22        GB/T 13354-1992

Operate Time at Room Temperature

(day@25℃) 7

Curing Condition Recommended

90-120s at 120℃.

60-90s at 150℃

The product will obtain to higher bonding strength when higher curing temperature and longer

cured time .

The figure curve is the recommended curing temperature and heating rate, The time is need that the components achieve good bonding strength need time at 120℃or 150℃.

◆Date Table

Fully cured Cured for 30min@150℃



Shore D

GB/T 2411-1980

Shear Strength



GB/T 7124-1986




ASTM E1545

Dielectric strength




Surface resistance




Volume resistance



GB/T 1410-2006


Direction For Use:

The product should be recovered to room temperature before use, don't open the aluminum foil package before recovered to room temperature(the recovering time of 300ml packaging at least 4 hours and 30ml packaging at least 2 hours).

Suggest that the drop pressure is 0.15-0.35 MPa . Preheating temperature of glue head is 30-35℃

When the equipment don't work for long time, don't put the needle with not using up glue in equipment and don't soak in the solvent .Clean timely

Not cured adhesive which is stick on line wires can be erased with acetone or propylene alcohol ethers.please seal and chill at 2-8℃ when not using up the glue.


Keep away from children.

The workshop should be adequate ventilation.

Wash with soapy water if on skin.

Wash with a lot of soapy water and then go for doctor if in eyes.

For more information, please refer to MSDS..

◆Package and Storage


1.20ML; 30ML; 300ML


1. 6 months sealed at 2-8℃.

◆Safety Operation Material

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from Sepuna or other distributors, or mail to service center, or call +86-400-882-1323.

◆Product Warranty

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.

Hot Tags: surface mount epoxy adhesive, China, manufacturers, suppliers, factory, wholesale, cheap, high-quality, price, best, hot sale, in China
Related Products

Product Categories

Fast Track

  • Feedback
    Shanghai Sepna Chemical Technology Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: No.1129,Denghui Road,Minhang District,Shanghai,China
    Tel: +86-021-66310806    
    Fax: +86-021-66310906    
Copyright © Shanghai Sepna Chemical Technology Co.,Ltd