Shanghai Sepna Chemical Technology Co.,Ltd
Call us on:+86-021-66310806   E-mail: sepna301@sepna.cc
Products
Transparent Fast Curing Structural Epoxy

Transparent Fast Curing Structural Epoxy

Fast Curing Transparent Epoxy Adhesive SE2617◆Detailed Product DescriptionSE2617 is epoxy adhesive with very high tensile and high curing speedFeatures1.Resistance of moisture,

If you are planning to wholesale best cheap and high quality transparent fast curing structural epoxy China, or hot sale transparent fast curing structural epoxy in China from professional transparent fast curing structural epoxy manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.

Fast Curing Transparent Epoxy Adhesive SE2617

◆Detailed Product Description

SE2617 is epoxy adhesive with very high tensile and high curing speed

Features

1.Resistance of moisture, pollution and other atmospheric constituent 

2.High tensile, excellent adhesive property

3.Excellent pollution resistance, the demand of preprocess is low

4.Solvent free, no by-product in curing

5.Stable mechanical and electricity in -45℃~120℃

6.Excellent adhesive performance with fiberglass and metal sheet

Use

Bonding metal, glass, plastic, paper, rubber, fabric, etc.

◆Data Table

Properties before curing

Part

2617A

2617B

Component

polysiloxane

Hydrogen polysiloxane

Appearance

Transparent thickliquid

Pale yellow thickliquid

Viscosity, mPa.s(25℃)

10000-12000

5000-8000

Density,  g/cm3(25℃)

1.1

1.1

Mixture/mass ratio

A:B = 100:100

Viscosity after mixing, mPa.s (25℃)

9000-11000

Operation time after mixing, min(25℃)

2min

Preliminary curing time(min)

5

Properties after curing

Hardness, Shore D

80

Shear strength,  Mpa,Al/Al

10

Shear strength,  Mpa, Fe/ Fe

12

Expansion parameterμm/(m,℃)

44

Water absorption 24h,25℃,%

<0.3

Dielectric strength, KV/mm

>20

Loss factor(1 MHz)

0.014

Dielectric constant (1 MHz)

3.53

Volume resistance DC500V, Ω·cm

1.2×1015

Note:

①All data above were tested under standardized condition.

②All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.

③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’storing

◆Operation

1.Mix Part A and Part B by 1:1 evenly, seal the parts after using.

2.Stirring by one direction for avoiding the bubbles; the frame and bottom also need to be stirred evenly, or it will cause not cure situation.

3.Low temperature will slow the curing speed, if the primary strength can’t get, the application environment needs to do constant temperature control.

4.Taking care of the material mouth seal in using

◆Package and Storage

Package                                         Storage

Cartridge: 2*25ml                          Seal and Avoid light and light

Barrel:  2*1KG                               Temperature≤25℃, humidity≤50%RH

Shelf life: 12 months

◆Safety Operation Material

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center sepuna.@sepuna.cn , or call +86-400-882-1323.

◆Product Warranty

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.


Hot Tags: transparent fast curing structural epoxy, China, manufacturers, suppliers, factory, wholesale, cheap, high-quality, price, best, hot sale, in China

Product Categories

Fast Track

  • Feedback
    Shanghai Sepna Chemical Technology Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: No.1129,Denghui Road,Minhang District,Shanghai,China
    Tel: +86-021-66310806    
    Fax: +86-021-66310906    
    E-mail: sepna301@sepna.cc
Copyright © Shanghai Sepna Chemical Technology Co.,Ltd