Shanghai Sepna Chemical Technology Co.,Ltd
You are here: Home > Products > MS Polymer
MS Polymer Adhesive Sealant

MS Polymer Adhesive Sealant

MS1220 is one-component multi-purpose and anti-sagging elastic sealant; it can react with moisture in the air and then it is cured, to form a permanent elastomer. ◆Detailed Product DescriptionProduct

    If you are planning to wholesale best cheap and high quality ms polymer adhesive sealant China, or hot sale ms polymer adhesive sealant in China from professional ms polymer adhesive sealant manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.

    MS1220 is one-component multi-purpose and anti-sagging elastic sealant; it can react with moisture in the air and then it is cured, to form a permanent elastomer. 

    ◆Detailed Product Description

    Product description

    PUNADE MS series is a silane-modified polyurethane sealant, with the advantages of polyurethane and silicone sealants; it is a flexible sealant widely recognized as with the best overall performance, and can meet the needs of adhesive bonding and flexible sealing for a variety of occasions. PUNADE MS1220 is manufactured in strict accordance with ISO9001/14001 Quality Assurance System and related protection provisions.


    1.Low VOC, silicone, plasticizer migration, or bubbles curing, with very little odor.

    2.With a wide range of flexible  bonding and durability, primer bonding-free.

    3.It can be painted, polished, and bonded and repaired in a repeated manner, but necessary surface requirements are not changed when substrates are re-bonded.

    4.UV resistant, anti-aging and weathering resistance, flooding resistant and mould resistant.

    5.Dealcoholized curing, no corrosion to substrates, and substrates not polluted, in line with the standard for stone stain resistance.

    6.Resistant to fresh water, sea water and usually water-based cleaning agents, and has a strong bearing capacity to fuel, mineral oil, vegetable oil and animal fat and crude oil, 

    7.Intolerant to concentrated organic or inorganic acid/base solution or solvent.

    8.For specific requirements, we will provide relevant products and advice.


    1.Good adhesion to many substrates, include wood, various metal and surface treatment (painting or plating), glass, concrete products, mortar, ceramic materials and plastics and rubber and so on.

    2.Suitable for industrial bonding and fixing (such as the installation of automobile windshield, and the manufacturing of means of transportation and lift cabinets),

    3.Flexible seal bonding and fixing required for medium strength and high modulus.

    4.Compatibility test should be done on the actual substrates and in the environment in advance.

    ◆Date Table

    Chemical base

    One-component modified polyurethane


    White, gray, black, beige and customed color

    Curing mechanism



    About1.3kg/L (based oncolor)




    Good,without saggingtrend

    Construction temperature


    Surface curing time

    (dependent onstate of the environment)


    Curing rate

    (dependent onstate of the environment)

    3days about 13mm

    Shrinkage rate

    About 2%

    Shore A hardness

    About 25

    Glass transition temperature


    Interface displacement capacity

    (ISO11600 and JC485 standard classification)

    25% (The joint displacement 100%)

    Elasticity modulus

    (ISO11600 and JC485 standard classification)

    LM (Low modulus)

    Recommended Substrate

    (ISO11600 standard classification)

    F+G (cement and glass)

    Recommended Substrate

    (ISO11600 standard classification)

    M+C+G+Q (metal, cement, glass and others)

    Operating temperature

    Long-term -40℃--+80℃

    Shelf life(sealed storage at below 25℃)

    12 months

    Notice:The product has passed below test standards

    ISO11600-2002   Construction structure—Joint products—Classification and requirement of sealants    25LM F+G

    JC/T976-2005   Bridge joint sealant  25LM-MCGQ-A-K

    JC485-92   Elasticity construction sealants for window   MS-1-MCGQ-A-K

    JC/T881-2001  Concrete joint construction sealant I-N-25LM

    JC/T883-2001   Construction sealant for stone   I-MS-25HM

    JC/T884-2001   Construction sealant for Color coated steel   I-MS-25HM

    JC/T885-2001   Construction sealant for mould proofing   MS-20HM-0


    1) Surface treatment

    Bonding surfaces should be clean, dry, without grease, oil and dust; for the surfaces difficult for bonding (such as PP/PE material) the bonding effect can be increased by applying primer. For details call us.

    2) Construction

    ---Rigid packaging: cut the tube mouth.

    ---Flexible packaging: put glue into the glue gun and cut the closed mouth.

    ---In accordance with the designed adhesive strip cutting nozzle, the glue gun for manual hard tube, pneumatic piston glue gun or rubber pump equipment must be used in order to achieve satisfactory sealing effect.

    ---If PUNADE MS1220 will touch with polyurethane bonding glue or paint, we must wait until polyurethane is fully cured before PUNADE MS1220 can be used for jointing or bonding.

    3) Trimming and finishing

    Trimming and finishing must be conducted before drying the surface, and prior applicability/compatibility test on the finishing agents or lubricants must be done.

    4) Cleaning

    ---The PUNADE MS1220 uncured can be removed from tools or equipment, with the use of a suitable solvent or PUNADE Cleaning Paste

    ---Once cured it can only be removed by mechanical method

    --- Immediately cleaned with industrial hand cleaner and water if stick to skin 

    ---The redundant sealant not used up can be sealed and saved, and the cured part on its surface can be removed before next use. Applicability test is needed.

    5) Surface painting (when necessary)

    ---PUNADE MS1220 can be available for painting before and after drying the surface.

    --- A compatibility test should be done before painting.

    ---The thickness and hardness of the paint layer may weaken the elasticity of glue, and it is possible for the paint to be cracking.

    ◆Package and Storage


    Hard tube: 300ml;   Hose: 600ML;         Keg: 23L;   Barrel: 195L.

    Storage and transport 

    Shelf life (sealed storage at below 25℃): 12 months.

    ◆Safety Operation Material

    MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from SEPNA or other distributors, or mail to service center, or call +86-400-882-1323.

    ◆Product Warranty

    All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. SEPNA don't make assurance of any other applications outside the specification until SEPNA supply a special written guarantee. SEPNA is only responsible to replace or refund if this product is defective within the warranty period stated above. SEPNA makes it clear that will not be liable of any accidents.

    Hot Tags: ms polymer adhesive sealant, China, manufacturers, suppliers, factory, wholesale, cheap, high-quality, price, best, hot sale, in China

    Product Categories

    Fast Track

    • Feedback
      Shanghai Sepna Chemical Technology Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: No.1129,Denghui Road,Minhang District,Shanghai,China
      Tel: +86-021-66310806    
      Fax: +86-021-66310906    
    Copyright © Shanghai Sepna Chemical Technology Co.,Ltd