Shanghai Sepna Chemical Technology Co.,Ltd
Call us on:+86-021-66310806   E-mail:
MS Polymer Sealant For Refrigerator Truck

MS Polymer Sealant For Refrigerator Truck

MS1353 is a one component multi-purpose and anti-sagging elastic sealant; it can react with moisture in the air and then it is cured, to form a permanent elastomer.◆Detailed Product DescriptionProduct

If you are planning to wholesale best cheap and high quality ms polymer sealant for refrigerator truck China, or hot sale ms polymer sealant for refrigerator truck in China from professional ms polymer sealant for refrigerator truck manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.

MS1353 is a one component multi-purpose and anti-sagging elastic sealant; it can react with moisture in the air and then it is cured, to form a permanent elastomer.

◆Detailed Product Description

Product description

PUNADE MS series is a silane-modified polyurethane sealant, with the advantages of polyurethane and silicone sealants.MS1353 is manufactured in strict accordance with ISO9001/14001 Quality Assurance System and related protection provisions.


1.Low VOC, silicone, plasticizer migration, or bubbles curing, with very little odor.

2.Wide range of flexible bonding and durability, primer bonding-free.

3.It can be painted, polished, and bonded and repaired in a repeated manner, but necessary surface requirements are not changed when substrates are re-bonded.

4.UV resistant, anti-aging and weathering resistance, flooding resistant and mould resistant.

5.Resistant to fresh water, sea water and usually water-based cleaning agents, and has a strong bearing capacity to fuel, mineral oil, vegetable oil and animal fat and crude oil,

6.Intolerant to concentrated organic or inorganic acid/base solution or solvent. For specific requirements,we will provide relevant products and advice.

7.Dealcoholized curing, no corrosion to substrates, and substrates not polluted, in line with the standard for stone stain resistance.


1.Specially used for marine wood floor filling and bonding

2.Good adhesion to many substrates, include wood, various metal and surface treatment (painting or plating), glass, concrete products, mortar, ceramic materials and plastics and rubber and so on.

3.Suitable for industrial bonding and fixing (such as the installation of automobile windshield, and the manufacturing of means of transportation and lift cabinets),

4.Flexible seal bonding and fixing required for medium strength and high modulus.

5.Compatibility test should be done on the actual substrates and in the environment in advance.

◆Date Table

Chemical base

One-component modified polyurethane


White, gray, black and beige

Curing mechanism



About 1.4kg/L

Extrusion rate

About 600g/min


Mild liquidity

Construction temperature


Surface curing time


(dependent on state of the environment)

Curing rate

3-5days about 13mm

(dependent on state of the environment)

Shrinkage rate

About 2%

Shore A hardness

About 50

Glass transition temperature


Tensile strength

> 2.0Mpa.

Elongation at break

> 550%

Tear strength

About 14N/mm

Interface displacement capacity

25% (The joint displacement 100%)

(ISO11600 and JC485 standard classification)

elasticity modulus

HM (high modulus)

(ISO11600 and JC485 standard classification)

Recommended Substrate

F+G (cement and glass)

(ISO11600 standard classification)

Recommended Substrate

M+C+G+Q (metal, cement, glass and others)

(ISO11600 standard classification)

Artificial Ultraviolet (uv) Light

No crack, pulverization, and discoloration on the



Operating temperature

Long-term -40℃ --+90℃

10 hours 120℃

1 hours 145℃

Shelf life (sealed storage at below 25℃ )

12 months

Notice:The product has passed below test standards


Construction structure&—Joint products—Classification and requirement of sealants

25HM F+G


Elasticity construction sealants for window   MS-1-MCGQ-A-K


Construction sealant for concrete joint  I-N-25HM


Construction sealant for stone   I-MS-25HM


Construction sealant for color coated steel



Construction sealant for mould proofing



1) Surface treatment

Bonding surfaces should be clean, dry, without grease, oil and dust; for the surfaces difficult for bonding (such as PP/PE material) the bonding effect can be increased by applying primer. For details call us.

2) Construction

---Rigid packaging: cut the tube mouth.

---Flexible packaging: put glue into the glue gun and cut the closed mouth.

---In accordance with the designed adhesive strip cutting nozzle, the glue gun for manual hard tube, pneumatic piston glue gun or rubber pump equipment must be used in order to achieve satisfactory sealing effect.

---If PUNADE MS1353 will touch with polyurethane bonding glue or paint, we must wait until polyurethane is fully cured before PUNADE MS1353 can be used for jointing or bonding.

3) Trimming and finishing

Trimming and finishing must be conducted before drying the surface, and prior applicability/compatibility test on the finishing agents or lubricants must be done.

4) Cleaning

---The PUNADE MS1353 uncured can be removed from tools or equipment, with the use of a suitable solvent or PUNADE Cleaning Paste

---Once cured it can only be removed by mechanical method

--- Immediately cleaned with industrial hand cleaner and water if stick to skin

---The redundant sealant not used up can be sealed and saved, and the cured part on its surface can be removed before next use. Applicability test is needed.

5) Surface painting (when necessary)

---PUNADE MS1353 can be available for painting before and after drying the surface.

--- A compatibility test should be done before painting.

---The thickness and hardness of the paint layer may weaken the elasticity of glue, and it is possible for the paint to be cracking.

◆Package and Storage


Hard tube: 300ml; Hose: 600ML;  Keg: 23L;   Barrel: 195L.

Storage and transport

Shelf life (sealed storage at below 25℃): 12 months.

◆Safety Operation Material

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from SEPNA or other distributors, or mail to service center, or call +86-400-882-1323.

◆Product Warranty

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. SEPNA don't make assurance of any other applications outside the specification until SEPNA supply a special written guarantee. SEPNA is only responsible to replace or refund if this product is defective within the warranty period stated above. SEPNA makes it clear that will not be liable of any accidents.

Hot Tags: ms polymer sealant for refrigerator truck, China, manufacturers, suppliers, factory, wholesale, cheap, high-quality, price, best, hot sale, in China
Related Products

Product Categories

Fast Track

  • Feedback
    Shanghai Sepna Chemical Technology Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: No.1129,Denghui Road,Minhang District,Shanghai,China
    Tel: +86-021-66310806    
    Fax: +86-021-66310906    
Copyright © Shanghai Sepna Chemical Technology Co.,Ltd