Shanghai Sepna Chemical Technology Co.,Ltd
Products

Clear Epoxy Potting Compound

Transparent Epoxy Encapsulating Compounds SE2208 ◆Detailed Product Description SE2208 is a 2 parts transparent Epoxy Potting Compounds for electronics and electrical equipment industry.Features1.

    If you are planning to wholesale best cheap and high quality clear epoxy potting compound China, or hot sale clear epoxy potting compound in China from professional clear epoxy potting compound manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.

    Transparent Epoxy Encapsulating Compounds SE2208 

    ◆Detailed Product Description

    SE2208 is a 2 parts transparent Epoxy Potting Compounds for electronics and electrical equipment industry.

    Features

    1.Good toughness, high hardness

    2.Excellent adhesion, anti-cracking resistance

    3.Excellent electrical insulating properties, stability 

    4.Good waterproof, moisture resistance, very low water absorption

    Use

    For potting of transparency requirements electronic components and modules, especially used in lighting lamps and lanterns of potting of transparency requirements at room temperature.

    ◆Data Table


    Properties before curing

    Appearance

    liquid cement A

    Transparent fluid

    liquid cement B

    Transparent fluid

    Density,g/cm3

    25℃

    liquid cement A

    1.05~1.15

    liquid cement B

    0.94~0.96

    Mixed

    0.99~1.01

    Viscosity,cps

    25℃

    liquid cement A

    1500~1800

    liquid cement B

    300~500

    Mixed

    600~900

    Mixture/mass ratio, weight

    2:1

    Usable time , hr ,25℃ ,100g

    0.5

    Preliminary curing time hr,25℃

    3-4

    Completely cure time,hr, 25℃

    24

    Properties after

    curing

    Hardness ,Shore-D

    >85

    Volume resistance,Ω.cm,25℃

    1.2×1015

    Breakdown Voltage,kV/mm,25℃

    >30

    Dielectric constant ,1.2MHz,25℃

    3.3±0.1

    dielectric loss tangent,1.2MHz

    <0.01

    curing shrinkage rate,%

    <2

    Tensile-shear strength,Fe-Fe,MPa

    >10

    Operating temperature range,℃

    -40~100

    Flammability class UL 94

    ----

    Note:

    ①All data above were tested under standardized condition.

    ②All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.

    ③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing

    ◆Operation

    1.Long-term place A component rubber must be stirred evenly in their original packaging before using (because of the ment may be precipitated,  there may be A stir after use, will not affect the Performance ).

    2.The curing speed due to temperature changes are different in different seasons is normal low winter temperature curing will be slower. The above adhesive can be used the heating curing methods.

    3.Some types of  adhesive  A, B component s under the condition of low temperature may crystallization occurs, caking, which is normal; it can be placed in a 80 ° C oven to melt before using, add to room temperature, it does not affect its performance. 

    4.In the rubber mixing  process, note that the inner wall of the container must be adhesive solution turn-back stirring, in order to ensure the uniformity of the rubber mixing . The curing time is affected by temperature, winter can choose to use SEPNA Winter recipe.

    ◆Package and Storage

    Package:                                                    

    Part A : 10kg/pot      Part B: 5kg/pot 

    Storage: 

    Seal and Avoid light and light

    Temperature≤25℃, humidity≤50%RH

    Shelf life: 12 months    

    ◆Safety Operation Material

    MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center sepuna@sepuna.cn, or call +86-400-882-1323.

    ◆Product Warranty

    All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.


    Hot Tags: clear epoxy potting compound, China, manufacturers, suppliers, factory, wholesale, cheap, high-quality, price, best, hot sale, in China

    Product Categories

    Fast Track

    • Feedback
      Shanghai Sepna Chemical Technology Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: No.1129,Denghui Road,Minhang District,Shanghai,China
      Tel: +86-021-66310806    
      Fax: +86-021-66310906    
      E-mail: sepna301@sepna.cc
    Copyright © Shanghai Sepna Chemical Technology Co.,Ltd