Thermally Conductive Epoxy Potting Compound SE2215 ◆Detailed Product DescriptionSE2215 is 2 component excellent adhesion and heat-resistance solvent-free room temperature curable Epoxy
If you are planning to wholesale best cheap and high quality high temperature potting compound China, or hot sale high temperature potting compound in China from professional high temperature potting compound manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.
Thermally Conductive Epoxy Potting Compound SE2215
◆Detailed Product Description
SE2215 is 2 component excellent adhesion and heat-resistance solvent-free room temperature curable Epoxy Potting Compound
1.Excellent adhesion, resistance to cracking
2.Good toughness, high hardness
3.Excellent electrical insulation properties, stability
4.High thermal conductivity, low thermal expansion coefficient
5.Higher Tg, can be used in the 150 ℃ -180 ℃ long-term
6.Good waterproof, moisture resistance, low water absorption
7.Flame retardant grade up to UL94 V-2
It is suitable for electric tools and high thermal conductivity packaging protection product requirements in automotive electronics.
Properties before curing
A：B = 7: 1
Viscosity after mixing， mPa.s (25℃)
Operation time , hr(25℃)
Gel time ,hr(25℃)
Properties after curing
Hardness, Shore D
Expansion coefficient μm/（m，℃）
Thermal conductivity W/mK
Glass transition temperature ℃
Tensile-shear strength, Mpa， Fe/ Fe
Dielectric strength kV/mm（25℃)
Dielectric constant (1 MHz)(25℃)
Volume resistance DC500V, Ω·cm
Temperature range , ℃
①All data above were tested under standardized condition.
②All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.
③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing
1.Mixing:Stirring A component evenly in the original package, then A, B components according to the weight ratio of 7:1 are weighed and mixed, then start to potting after mixing evenly .
2.The B component may appear crystal or caking during storage ( this is normal), if the crystallization need to placed in the oven at 80℃ to melt before using(the containers should be in open state,in order to avoid the gas expansion, damage container), and then cooling to room temperature before using, It does not affect its performance.
3.If necessary, the device with good sealing can continue to vacuumize , is helpful to increase the electrical properties of the device.
4.The curing conditions: 80 ℃/2hrs or 25 ℃/24hrs.
5.For the use of glue equipment please consult our marketing department.
◆Package and Storage
A component:14kg/ plastic bucket
B component : 1kg/ bottle
Keep in cool and ventilative place
Shelf life: 12 months both of A and B component
◆Safety Operation Material
MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center email@example.com , or call +86-400-882-1323.
All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.