Shanghai Sepna Chemical Technology Co.,Ltd
Call us on:+86-021-66310806   E-mail: sepna301@sepna.cc
Products
RTV Transparent Silicone Pouring Adhesive

RTV Transparent Silicone Pouring Adhesive

SI1107RTV SI1107 is room temperature curing neutral pouring silicone sealant.◆Detailed Product Description Features 1.Good resistance to moisture, dirt and other atmospheric constituents.

If you are planning to wholesale best cheap and high quality rtv transparent silicone pouring adhesive China, or hot sale rtv transparent silicone pouring adhesive in China from professional rtv transparent silicone pouring adhesive manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.

SI1107

RTV SI1107 is room temperature curing neutral pouring silicone sealant.

◆Detailed Product Description

Features 

1.Good resistance to moisture, dirt and other atmospheric constituents.

2.Reduce the mechanical stress and tensile force caused by the mechanical, thermal shock and shake.

3.Excellent insulating performance, good resistance to corona.

4.Outstanding aging resistance. The period of validity could be 20-30 years.

5.Stable mechanical and electrical properties( -60-260 ℃ )

6.Fire resistance

7.Adhesive sealing performance

Usage

Used for protection of electronic products under severe conditions

◆Data Table


Properties before curing

Testing Term

Testing standard

Unit

Data

Color

---

---

Transparent

White/Black/

customize

Viscosity

GB/T 10247-2008

mPa·s(25℃)

40000

40000

Density

GB/T 13354-92

g/cm3(25℃)

0.95-1.05

0.95-1.10

Touch Dry Time

GB/T13477.5-2002

min(25℃,55%RH)

5-10

5-10

Properties before curing

Hardness

GB/T 531.1-2008

Shore A

20-30

20-30

Thermal conductivity

GB/T 10297-1998

W/mK

0.2

0.2

Coefficient of expansion

GB/T 20673-2006

μm/(m,℃)

290

210

water absorptivity

GB/T 8810-2005

24h,25℃,%

0.01-0.02

0.01-0.02

flame retardant rating


UL-94

3mmThickness,105℃

V-1

elongation at break

GB/T 528-1998

%

≥200

≥200

Tensile Strength

GB/T 528-1998

Mpa

≥0.50

≥1.00

Shear strength

GB 6328-86

Mpa,Iron/Iron

≥0.90

≥1.50

Dielectric strength

GB/T 1693-2007

kV/mm(25℃)

≥20

≥20

lose factor

GB/T 1693-2007

(1MHz)(25℃)

0.001

0.001

dielectric constant

GB/T 1693-2007

(1MHz)(25℃)

2.8

2.8

Volume resistivity

GB/T 1692-92

(DC500V)Ω·cm

5.00E +14

5.00E +14

Note:

①All data above were tested under standardized condition.

②All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.

③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.

◆Operation and Attention

1.Cleaning: cleaning the surfaces that to be glued and coated, removing the rust, dust, greasy dirt and other foreign matter and substance.

2.Gluing: cutting nozzle to the required angle ( piercing the sealing cap tip for these sealing rubber hose), extruding the liquid cement to the cleaned surface and making it well-distributed, then folding and fixing the glued surfaces. Please consult the PUNADE market department when come into the dispensing equipment. 

3.Curing: placing the glued or sealed components in the air for 24 hours to make them cured naturally, and then putting into the use.

4.Attention: tightening and sealing preserve the leftover sealant after the operation. Removing the cured cement at the sealing part that might happen during the preservation, it could be normally used again.

◆Package and Storage

Package                                       

310ml Tube, 25pcs/carton  

Color:Black/White/Transparent/Grey  

Storage and transport

1 Kept sealed in cool and dry place.(Non-dangerous, stored and transported as normal chemical )

2 Shelf life is 12 months(25℃).

Out of the deadline, pls test the performance of the products that before using.

◆Safety Operation Material

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center sepuna@sepuna.cn, or call +86-400-882-1323.

◆Product Warranty

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.


Hot Tags: rtv transparent silicone pouring adhesive, China, manufacturers, suppliers, factory, wholesale, cheap, high-quality, price, best, hot sale, in China

Product Categories

Fast Track

  • Feedback
    Shanghai Sepna Chemical Technology Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: No.1129,Denghui Road,Minhang District,Shanghai,China
    Tel: +86-021-66310806    
    Fax: +86-021-66310906    
    E-mail: sepna301@sepna.cc
Copyright © Shanghai Sepna Chemical Technology Co.,Ltd