Shanghai Sepna Chemical Technology Co.,Ltd
Products
Abstract: If you are planning to wholesale best cheap and high quality silicone heat sink compound China, or hot sale silicone heat sink compound in China from professional silicone heat sink compound manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.
Silicone Heat Sink Compound

If you are planning to wholesale best cheap and high quality silicone heat sink compound China, or hot sale silicone heat sink compound in China from professional silicone heat sink compound manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.

One Component Organic Silicone Sealant SI1317

SI1317 is one component room temperature curing organic silicone sealant with high elasticity. No corrosion (alcohols that released in the process of solidification) to the PC, CU and other materials.

◆Detailed Product Description

Features

1.Excellent thermal and insulating performance

2.Good resistance to moisture, dust. corona and buffering to earthquake.

3.Stable resistance to high and low temperature(-60~260℃)

4.Outstanding aging resistance. The period of validity could be 10-20 years

5.No yellowing and leakage after cured. Good comprehensive performance.

Usage

1.as heat—conducting medium of electronic parts and components when needed.

2.as filling compound between power transistor, thyristor diode and their base material (aluminum, Cu)

◆Date Table

No Curing

Testing Term

Testing Standard

Unit

SI1317

Color

Visually

---

White

Viscosity

GB/T 10247-2008

25℃,mPa·s

Paste

Density

GB/T 13354-92

25℃,g/cm3

2.25

Curing Speed

GB/T13477.5-2002

25℃,55%RH,min

5-10

Fully cured

Hardness

GB/T 531.1-2008

Shore A

55±5

Tensile Strength

GB/T 528-1998

MPa

≥2.5

Tensile-shear Strength

GB/T 6328-86

Mpa,Al/Al

≥2.0

Elongation at break

GB/T 528-1998

%

≥150

Peel Strength

GB/T 6328-86

N/mm

>5

Thermal Conductivity

GB/T 10297-1998

W/mK

1.45

Dielectric Strength

GB/T 1693-2007

kV/mm(25℃)

≥20

Dielectric Wastage

GB/T 1693-2007

(1MHz)(25℃)

0.09

Dielectric Constant

GB/T 1693-2007

(1MHz)(25℃)

2.9

Volume Resistance

GB/T 1692-92

(DC500V)Ω· cm

2.00E +14

Note:

①All data above ware tested under standardized condition.

②All data listed in the chart were for the generalized item in the series; please refer to the related

datasheet for  special items.

③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for

special items’storing.

◆Operation and Attention

Operation:

1.Cleaning: cleaning the surfaces that to be glued and coated, removing the rust, dust, greasy dirt and other foreign matter and substance.

2.Gluing: cutting nozzle to the required angle, extruding the liquid cement to the cleaned surface and making it well-distributed, then folding and fixing the glued surfaces.

3.Curing: placing the glued or sealed components in the air to make them cured naturally. Curing is a process that being cured from surface to the internal.The sealant will be cured at a depth of 2~4mm within 24 hours (at room temperature and 55% relative humidity), if the glue position is deeper, especially the parts that not easy to come into the air,the time that being completely cured will be longer, if the temperature is low, the curing time will also be extended. It will take more than 7 days to make 6 mm thick sealant fully cured

Attention:

1.Tightening and sealing the leftover sealant after the operation.        

2.Removing the cured cement at the sealing part that might happen during the   preservation, it could be normally used again.

◆Package and Storage

Package:

310ml cartridge, 20pcs/carton

Storage:

1.Kept in cool and dry place(≤35℃),the shelf life is 12 months when stored below 25℃.

2.Not restricted. Looking out the leakage in the process of transportation.

3.Confirming the condition of the products that out of deadline before using.

◆Safety Operation Material

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from

Sepuna or other distributors, or mail to service center sepuna@sepuna.cn, or call +86-400-882-1323.

◆Product Warranty

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.

Hot Tags: silicone heat sink compound, China, manufacturers, suppliers, factory, wholesale, cheap, high-quality, price, best, hot sale, in China

Product Categories

Fast Track

  • Feedback
    Shanghai Sepna Chemical Technology Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: No.1129,Denghui Road,Minhang District,Shanghai,China
    Tel: +86-021-66310806    
    Fax: +86-021-66310906    
    E-mail: sepna301@sepna.cc
Copyright © Shanghai Sepna Chemical Technology Co.,Ltd